# How Many Lumens Is 30 Foot Candles?

## How many lumens do I need in a bathroom?

The only light will be above the mirror over the vanity.

A useful rule of thumb for bath vanities is to use a minimum of two 60-watt incandescent bulbs, which typically produce approximately 800 lumens each for a total of 1,600 lumens..

## How many lumens equal a foot candle?

A foot-candle equals one lumen per square foot. This is a British measurement. Using the metric system, a lumen is measured by a square meter or a lux. Thus a foot-candle is equivalent to approximately 10 lux or 10.57 lux.

## How many lumens is 5 foot candles?

1 Lumen per Square Foot: 1 Lumen per square foot is equivalent to 1 Footcandle, in terms of SI units it is 10.7639104167097 Lux. 1 lm/ft2 = 10.7639104167097 lx….Please share if you found this tool useful:Conversions Table5 Lumens Per Square Foot to Footcandles = 5200 Lumens Per Square Foot to Footcandles = 20014 more rows

## What’s the difference between lux and foot candles?

There is no difference between foot candles and lux in respect of what they measure. … The footcandle is an ‘imperial measurement’, while lux is a metric (or SI) measurement.

## Is 3000 lumens too bright?

In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom. You don’t want to blind your eyes when you’re about to go to bed. On the other hand, 2,000 lumens is ideal if you wish to light up a 200 square-foot living room.

## How bright is a foot candle?

One foot-candle is defined as enough light to saturate a one-foot square with one lumen of light.

## How many lights do I need in a room?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

## How many candlepower is a 60 watt bulb?

Your average 60 watt household light bulb produces 650 to 700 lumens when burned under standardized conditions. Therefore you can estimate that a 60 watt household light bulb, burned under average household conditions might produce somewhere between 50 and 55 candle power, give or take…

## How bright is 800 lumens?

Lumens measure brightness. A standard 60-watt incandescent bulb, for example, produces about 800 lumens of light.

## Is Lux the same as lumens?

Lux: The amount of light that is cast on a surface is called illuminance, which is measured in lux. This can be thought of as light intensity within a specific area. Lumens: The total output of visible light from a light source is measured in lumens. … One lux is equal to one lumen per square meter (lux = lumens/m2).

## How many lumens does a room need?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

## How many lumens is considered bright?

100 lumens is considered bright enough for most walkways — including commercial properties. 100 lumens is equivalent to about 20 watts.

## What does 10 lumens mean?

A lumen measures the amount of light that comes from a bulb. … A standard 40-watt (40W) bulb is equal to 400+ lumens.

## How strong is 5000 lumens?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

## How many lumens is a 30×40 shop?

30X40=1200sqft X 100 Lu = 120000 /2600 = 46 T8 32W tubes or 12 4 tube fixtures. 2600 lumens per 32W T8 tube is about average.

## What does 5 foot candles mean?

Believe it or not, foot candles are the most common unit of measure used by lighting professionals to calculate light levels in businesses and outdoor spaces. In a nutshell, a foot candle is a measurement of light intensity and is defined as the illuminance on a one-square foot surface from a uniform source of light.

## What is the difference between LED lumens and delivered lumens?

As the name suggests, total lumens measure the total light emitted from a source in all directions. This can include light emitted into the ceiling or within the fixture. Delivered lumens takes into account additional factors, such as reflection or refraction, to only measure the light in the space.

## How many Lux is a candle?

One foot candle is about 10.764 lux. Since one foot-candle is the illuminance cast on a surface by a one-candela source one foot away, a lux could be thought of as a “metre-candle”, although this term is discouraged because it does not conform to SI standards for unit names.